|This information is provided free of charge by the Department of Industrial Relations from its web site at www.dir.ca.gov. These regulations are for the convenience of the user and no representation or warranty is made that the information is current or accurate. See full disclaimer at http://www.dir.ca.gov/od_pub/disclaimer.html.|
| Return to index
(a) All machines, parts of machines, or component parts of machines which create hazardous revolving, reciprocating, running, shearing, punching, pressing, squeezing, drawing, cutting, rolling, mixing or similar action, including pinch points and shear points, not guarded by the frame of the machine(s) or by location, shall be guarded.
(b) Keys, set screws, projections or recesses which create a hazard not guarded by the frame of the machine or by location shall be removed, made flush or guarded.
NOTE: Section 4002 does not apply to points of operation. For point-of-operation requirements, refer to Group 8, commencing with Section 4184.
NOTE: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
1. Repealer and new section filed 10-25-74; effective thirtieth day thereafter (Register 74, No. 43).
2. Amendment filed 11-17-82; effective thirtieth day thereafter (Register 82, No. 47).
Go Back to Article 41 Table of Contents