This information is provided free of charge by the Department of Industrial Relations
from its web site at www.dir.ca.gov. These regulations are for the
convenience of the user and no representation or warranty is made that the information
is current or accurate. See full disclaimer at http://www.dir.ca.gov/od_pub/disclaimer.html.
Subchapter 7. General Industry Safety Orders
Group 8. Points of Operation and Other Hazardous Parts of Machinery
Article 71. Rubber and Composition Working Machines
§4587. Cutter-Sheet Rubber (Horizontal Cutter Type).
The exposed portion of the knife at the sides of the sliding table shall be covered with a metal enclosure (if not of solid type, openings shall not exceed one-quarter inch) so that the fingers of the operator cannot come into accidental contact with the knife when feeding the machine.
NOTE: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
1. Amendment of section heading filed 4-25-86; effective thirtieth day thereafter (Register 86, No. 17).
Go Back to Article 71 Table of Contents