Skip to Main Content

This information is provided free of charge by the Department of Industrial Relations from its web site at These regulations are for the convenience of the user and no representation or warranty is made that the information is current or accurate. See full disclaimer at
Subchapter 7. General Industry Safety Orders
Group 4. General Mobile Equipment and Auxiliaries
Article 35. Amusement Rides
Return to index
New query

§3914. Required Inspections.

(a) Each amusement ride shall receive certification in writing by a registered engineer that it meets the requirements established by the Division.

NOTE: If the manufacturer of an amusement ride submits to the Division an accepted stress analysis for such ride certified by a registered engineer, the Division may, upon inspection of the ride, issue an original certification of inspection.

(b) The original certificate of inspection shall not be issued for any amusement ride until certification has been made and filed with the Division. The certificate of inspection and the certification will become void if the device is rebuilt or modified in a manner that will affect the structural design or strength.

(c) A registration number shall be obtained from the Division and will be issued with the original certificate of inspection and this number will remain in effect until the engineering certification is voided by modification.

Go BackGo Back to Article 35 Table of Contents