TITLE 8
GENERAL INDUSTRY SAFETY ORDERS
CHAPTER 4, SUBCHAPTER 7, ARTICLE 60,
SECTION 4345
HOIST AND TILT-FRAME REFUSE AND TRASH COLLECTION EQUIPMENT


Amend Section 4345 to read:

4345. Hoist and Tilt-Frame Refuse and Trash Collection Equipment.

(a) Hoist and tilt-frame equipment placed in service on or after [ * ] March 15, 1978, which is used for handling refuse containers, shall be equipped with a permanent plate or marking which states the equipment is designed and constructed in accordance with the applicable sections of ANSI Z245.1-1975 1992, "Safety Requirements for Refuse Collection and Compaction Equipment." "American National Standard for Refuse Collection, Processing, and Disposal Equipment-Mobile Refuse Collection and Compaction Equipment-Safety Requirements."

(b) Hoist and tilt-frame equipment placed in service before [ * ] which is used for handling refuse containers shall be equipped with a permanent plate or marking which states the equipment is designed and constructed in accordance with the applicable ANSI Z245.1 standard in effect at the time the equipment was manufactured. In addition, the equipment shall comply with the requirements of these Orders.

(b)(c) Every hoist and tilt-frame vehicle shall be equipped with a backup warning device or other method as required by Section 3706(b).

(c)(d) Employees shall not be permitted to ride on any part of the vehicle other than in the cab when the hoist or tilt-frame equipment is in motion.

(d)(e) The controls of hoist or tilt-frame equipment shall not be actuated if any employee is in a position to be endangered by the movement resulting from that actuation.

NOTE: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code. See book for illustrations.

* Effective date of these orders to be filled in by the Office of Administrative Law.