|This information is provided free of charge by the Department of Industrial Relations from its web site at www.dir.ca.gov. These regulations are for the convenience of the user and no representation or warranty is made that the information is current or accurate. See full disclaimer at http://www.dir.ca.gov/od_pub/disclaimer.html.|
| Return to index
Knee bolter saws shall be provided with guards of 2-inch wooden or equivalent material secured to the carriage. Guards shall entirely cover the saw disc when the carriage is in the loading position. The saw shall be located so that there is no hazard of flying materials, or a barricade of no less than 2-inch planking shall be placed at the rear of the saws.
NOTE: Authority cited: Section 142.3, Labor Code. Reference:Section 142.3, Labor Code.
Go Back to Article 17 Table of Contents